A logo that looks sharp on a screen or a business card does not always stitch well. Thread is thicker than ink, so tiny text, faint gradients and hairline details can turn muddy on fabric. The good news is that most problems can be spotted before you order. Use this checklist to get your logo ready, then send it in for a quote.

This is a pre-order guide. If you want to understand what happens after you send art, see what embroidery digitizing is. Specific limits vary by studio, garment and design, so treat the numbers below as general guidance and confirm details for your job.

1. Send the best file you have

Our artwork page lists these accepted file types: AI, EPS, SVG, PDF, PNG, JPG, PSD, TIFF and ZIP. For embroidery, a few rules of thumb help:

  • Vector first: AI, EPS, SVG or a vector PDF can be resized without losing edges, and they are usually the easiest to work from.
  • Raster is fine if it is large and clean: our artwork guidelines suggest 300 DPI at final size for PNG, TIFF or PSD files. A small screenshot or a low-resolution JPG may need to be redrawn, which can slow things down.
  • Outline your fonts or include the font files so lettering does not change.
  • Several files? Put them in a ZIP and say which one is the main version.

No vector? Send what you have anyway. A clear original is better than a stretched copy from a website.

2. Check the smallest text

Small lettering is the most common reason a logo needs changes. As a general industry rule of thumb, lowercase text much smaller than about a quarter of an inch (roughly 6 mm) tall can struggle to stay readable in thread, and thin serif strokes or tight spacing make it worse. Fabric type, thread and stitch method all matter, so this is a starting point, not a guarantee.

  • Look at the tagline, the registered mark and any website address: these are usually the first to disappear.
  • Bold, simple letterforms hold up better than light, delicate ones.
  • If the text is too small, ask whether it can be enlarged, simplified or dropped from the embroidered version.

3. Count your colors and name them

Embroidery uses solid thread colors, not blends. A logo with a handful of flat colors usually translates cleanly. Photographs, soft shadows and smooth gradients do not stitch as they appear on screen, so expect them to be simplified into distinct color areas.

  • List the colors in your logo and how many there are.
  • Our guidelines mention Pantone (PMS) references for screen and embroidery work, so send them if you have a brand guide.
  • Say which colors are essential and which can be merged. White on a dark garment and black on a navy garment can behave differently from what you expect on screen.

4. Decide the stitched size and the placement together

The size on your artwork file is not the size on the garment. Pick the placement first, then size the logo to fit it. Our artwork guidelines ask you to note the area: chest, back, sleeve or hat.

  • A left-chest logo is small, so detail has to be simple.
  • A jacket back or large design has more room, but a larger area can also change how the fabric sits and feels.
  • A sleeve is narrow and curved, so wide, flat artwork may need to be adjusted.

Tell us the width you have in mind. If you are not sure, ask for a recommendation along with your quote request.

5. Caps and flat garments are not the same

A cap front is curved, has a seam running down the middle and is often structured, which makes it less forgiving than a flat polo or tote. Many logos need a simplified or reshaped version for hats, especially wide or tall designs and fine text. Our article on branded caps explains why hats are worth the extra planning. If you are ordering the same logo on caps and shirts, mention both in your request so the studio can advise on each.

6. Know what the proof should show

Ask to see a proof before anything is stitched. A useful proof shows:

  • The logo at the intended size on the intended placement.
  • Thread colors, named or matched to your references.
  • Spelling and spacing of all text, which you should read letter by letter.
  • Any changes made from your original, such as simplified details or removed small text.

Approve only when you are comfortable with all of it, since changes after stitching start are usually harder than changes at the proof stage.

Quick pre-order checklist

  1. Best available file, vector if possible, fonts outlined.
  2. Smallest text checked and simplified where needed.
  3. Colors counted, flat and named.
  4. Placement and approximate width decided.
  5. Garment types listed, including any caps.
  6. Proof requested and reviewed carefully.

Next step

Read about our custom embroidery service, send your logo through the artwork upload page, or request a quote with the garment, quantity, placement and any deadline. If your logo is not ready, our guide to vector logos for print and stitch can help.

About this article: written by the Truth Be Told Apparel team as general guidance on preparing logos for embroidery. Limits vary by design, garment and studio, so confirm details before ordering.