The Richardson 112 is a structured, mid-profile trucker cap with a cotton/polyester front, a polyester mesh back, a pre-curved bill and an adjustable snapback. It is one of the most requested blank caps for logo embroidery, and the number matters: Richardson sells several look-alike styles, and they do not all stitch the same way. This guide explains what the 112 is, how its relatives differ, and what to think about before you send a logo.

It is general guidance, not a promise about a specific order. Fabric blends and shapes are as listed on the Richardson 112 product page; always check the current listing for the colour you want.

What is the Richardson 112?

The 112 is a structured trucker with a solid front and a mesh back. As listed in the catalog, it has:

  • A 60/40 cotton/polyester front.
  • A 100% polyester mesh back.
  • A structured Mid Pro shape, which means a medium-height crown that keeps its form.
  • A pre-curved bill, an adjustable snapback closure and a cotton sweatband.

Some buyers search for a foam front trucker. The listing we work from does not mention foam, so ask if it matters for your design. The structured front is what matters most for embroidery. The mesh back is there for airflow and is a poor surface for dense stitching.

How does the 112 compare with the 112FP, 112FPC and 111?

Here is a side-by-side based on the specifications listed on each product page.

StyleShapeFrontBack
112Structured, Mid Pro60/40 cotton/polyester100% polyester mesh
112FPFive panels, structured, Mid Pro60/40 cotton/polyester100% polyester mesh
112FPCFive panels, structured, High Pro, pinch front60/40 cotton/polyester100% polyester mesh
111Unstructured, relaxed, garment washed100% cotton twill100% soft polyester mesh

If you saw a code such as "112PF" and are not sure what it is, check it against the supplier listing before ordering, because retailers do not always use these codes the same way. Ask us and we will help you confirm the style.

What does that mean for embroidery?

The 112, 112FP and 112FPC share a structured front, so they generally take embroidery in a similar way. The 111 is the outlier because it is unstructured.

  • 112. The listing does not say how many front panels it has, so ask the studio how your logo will sit on the front before you approve a layout.
  • 112FP (five-panel). Listed as a seamless five-panel version of the 112, which can make a wide or centred logo easier to place.
  • 112FPC (Champ). A taller High Pro crown with a pinched front. More height can leave room for a taller logo, but the shape curves, so ask how the design will sit.
  • 111 (unstructured). The front has less support, so dense or puffed stitching is riskier. See our guide to structured vs unstructured caps.

Can you do 3D puff on a Richardson 112?

Puff is commonly done on structured trucker fronts because the firm panel supports the foam under the stitches. It works best with bold, simple shapes and larger letters, and badly with fine detail. Whether puff suits your artwork is a design question for the digitizer. Our 3D puff embroidery guide covers which logos hold up.

Where does the logo go and how big should it be?

The standard spot is centred on the front panel, above the bill. Side and back placements are possible on many caps, but ask the studio before planning anything on or near the mesh.

Ask the studio to size the logo for the front panel of your cap, because the right size depends on the cap, the logo and the stitch count. Tall or square logos usually need to be reduced to fit the panel height. Small text becomes unreadable below a certain size, so a simplified version of the logo may look better than a tiny copy of the full one. For how stitch count affects cost, see how embroidery is priced.

What should you ask before ordering?

  1. Which exact style number should I choose for my logo, and why?
  2. How many front panels does this style have, and how will my logo sit on them?
  3. What size do you recommend for this cap and this artwork?
  4. Is puff suitable for my design, or should I stay with flat stitching?
  5. Can I see a digital mockup before anything is stitched?

On that last point: Truth Be Told Apparel has been working since 1995 and provides a free digital mockup before production. A mockup shows layout and colours but not how thread behaves on the cap, so it does not replace the conversation about size and puff.

Frequently asked questions

Is the Richardson 112 a snapback?

Yes. As listed, it has an adjustable snapback closure and a pre-curved bill.

What is the difference between the 112 and the 112FP?

The listed fabrics and structured Mid Pro shape are the same. The 112FP has five panels, which gives a seamless front panel.

Which Richardson cap is best for a detailed logo?

There is no single best. A structured cap with a seamless front, such as the 112FP, is often an easier canvas, but the logo's simplicity matters more than the cap number. Ask the studio to review your artwork.

Can I embroider the 111 the same way?

Not always. The 111 is unstructured, so heavy or puffed designs carry more risk. A lighter design usually suits it better.

Ready to order caps?

Browse hats, read about custom embroidery, and contact the studio with your style number, logo and quantity. You can also send artwork through the upload page. We reply within 1 to 2 business days, and pricing is confirmed in your quote, not on this page. For broader team and brand cap advice, see the custom embroidered hats guide.