Vector artwork is built from mathematical paths and can be resized without losing sharpness. Raster artwork is built from pixels and gets soft or blocky when enlarged. For custom apparel, vector is the preferred starting point for both screen printing and embroidery, and a raster file is usable only when it is large and clean enough. This guide explains how to tell the two apart, what to send, and what to do if all you have is a small image.
Vector vs PNG (raster) in plain terms
A vector file stores a logo as shapes, curves and fills. Scale it to a business card or to a banner and the edges stay crisp, because the software simply redraws the shapes. A raster file stores a grid of colored pixels. It looks fine at its original size, but stretch it and the software has to guess, which is where fuzzy edges and jagged stair-steps come from.
Neither type is "bad". Photos are raster by nature. Logos, lettering and simple illustrations are usually best kept as vector so they can be reused on a left-chest tee print, a hat, a patch and a banner without being redrawn each time.
How to tell which one you have
The file extension is a good first clue, though not a guarantee.
- Usually vector: AI, EPS, SVG, and PDF files that were saved from a design program with the artwork still as shapes.
- Usually raster: JPG, PNG, TIFF, GIF, and PSD files.
- Can be either: PDF. A PDF may hold live vector shapes or simply a pasted picture inside a PDF wrapper.
A quick test: open the file and zoom in as far as you can. If the edges stay sharp, it is very likely vector. If you see squares or blur, it is raster. Renaming a JPG to ".ai" or exporting a screenshot as a PDF does not turn it into vector; it only changes the label.
Which file format should you send: vector, PNG or JPG?
A quick format-by-format guide. It is general industry practice, not a studio promise; the studio's own accepted types are on the artwork guidelines page.
| Format | Type | How well it works for printing | Watch out for |
|---|---|---|---|
| Illustrator (.ai) | Vector | Best starting point | Fonts not outlined; very old file versions |
| EPS | Vector | Very good | Can hide an embedded picture; fonts |
| SVG | Vector | Very good | Live text fonts; files exported from some web tools |
| Either | Good if it holds live shapes | Can simply wrap a picture | |
| PNG | Raster | Fine if large, sharp and truly transparent | Small web-size files; a fake transparent background |
| TIFF or PSD | Raster | Fine if high resolution | Flattened layers; low resolution |
| JPG | Raster | Last resort | Compression blur and a solid background that must be removed |
When is a PNG good enough for a t-shirt?
A PNG is workable when it is large for the print size, the edges are clean, and the design is simple, with solid colors rather than glows or fine gradients. Transparency matters too: many PNGs only look transparent because a white or grey checkerboard pattern was drawn into the picture. Place the file on a colored background to check. If the checkerboard shows up, the background has to be removed before printing. JPG has no transparency at all, and its compression leaves blur around edges, which is why a PNG is generally the better raster choice for a logo.
What each decoration method needs from your file
Screen printing
Screen printing separates artwork into one screen per ink color, so clean edges and clearly defined colors matter. Vector files make that separation straightforward. A high-resolution raster can work, but fine detail, soft shadows and gradients may need extra handling or a simplified design. See the screen printing service for how the studio approaches color and placement, and the plastisol vs water-based ink guide if ink choice is also on your mind.
Embroidery
Embroidery is different again. A machine does not read an image at all; it follows a stitch file, and that file is created in a step called digitizing. Whether you start with vector or raster, the logo has to be converted into stitches. Clean vector art makes the digitizer's job easier because shapes and boundaries are already clear, but tiny text and thin lines can still be a problem at small sizes. Read what embroidery digitizing is and the embroidery logo requirements checklist before you finalize a design for custom embroidery.
Patches, stickers and vinyl
Shapes with a defined outline, such as a patch border or a die-cut sticker edge, depend on a precise path. Vector art gives the cleanest result. Details of the custom patch options are on the service page.
What the studio accepts
According to the studio's own artwork guidelines, vector files (AI, EPS, SVG, PDF) are preferred, and raster files (PNG, TIFF, PSD) are accepted at 300 DPI at final size. The upload form also takes JPG and ZIP, (see that page for the current file-size limit). If you need to send several files, put them in one ZIP.
What "300 DPI at final size" really means
DPI describes how many pixels fit into each inch of the printed design. The key phrase is "at final size". A logo that is 300 pixels wide is only about one inch wide at 300 DPI. If you need a 10-inch print, you need roughly 3,000 pixels across. A small image from a website or a social profile often fails this test, even if it looks sharp on a phone screen. Simply raising the DPI number in an editor does not add real detail; it only changes the stated density.
If all you have is a small PNG or JPG
This is very common, and it is not the end of the road. Try these in order:
- Look for the original. Ask whoever designed the logo, check old brand folders, previous print jobs, signage or website source files. A vector original often exists somewhere.
- Send the largest version you have. Do not compress, crop or screenshot it. The larger and cleaner the original, the more options the studio has.
- Ask for a rebuild. A designer can redraw a logo as clean vector shapes. The studio's graphic arts service covers this kind of cleanup; see making logos print- and stitch-ready for what that involves.
- Avoid one-click auto-tracing. Automatic trace tools can produce lumpy curves and extra points from a low-quality source. A rebuilt logo usually reads better than a traced one, though the right approach depends on the artwork.
Whether a rebuild is needed, and what it costs, depends on the file and the project, so confirm it in your quote rather than assuming.
Quick file check before you send
- Do you have the vector original (AI, EPS, SVG or a PDF with live shapes)?
- If not, is the raster file the largest version available, at 300 DPI at the size you plan to decorate?
- Is text still live or converted to outlines, and are the fonts either included or outlined? Missing fonts are a common cause of surprise substitutions.
- Are brand colors named (Pantone or thread references when you have them), rather than "like our website red"?
- Have you noted the intended placement and width, such as left chest or full front?
The broader version of this list is in the artwork checklist for print and stitch quotes.
Frequently asked questions
Is a PNG vector or raster?
PNG is a raster format. It can have a transparent background, which is useful, but it is still made of pixels and can look soft if enlarged.
Can a PDF be vector?
Yes, a PDF can contain live vector shapes, but it can also contain only a picture. The zoom test above is a quick way to check.
Can you convert my JPG to a vector file?
A logo can be redrawn as vector by a designer, and the studio offers graphic arts help for that. The result depends on how clear the original is, so send what you have and ask.
Do I need vector for embroidery?
Not strictly, because embroidery uses a stitch file made by digitizing. Still, clean source art, ideally vector, generally makes that step easier and more predictable.
Is PNG or JPG better for t-shirt printing?
PNG is usually better for logos because it supports a transparent background and does not blur edges the way JPG compression can. Neither beats a vector file, but a large PNG generally gives the studio more to work with than a JPG.
Is an SVG file vector?
Usually yes, but an SVG can also contain an embedded picture instead of shapes. Zoom in to check, and make sure text was converted to outlines or the font is included.
Can I send a Canva or Word file?
You can send what you have and ask the studio. Those programs are built for screens and office documents, so an export is generally more useful: a PDF or SVG if possible, or a very large PNG with a transparent background.
What if I am not sure what I have?
Send the file anyway. The studio can review it against its specs and tell you whether it works or needs attention.
Not sure your file is ready?
Send it through the artwork upload page or contact the studio with your quantity, garment and in-hand date, and ask for a recommendation on printing or stitching. Sorting out the file early is usually quicker than discovering a problem at proof time.